saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Hybrid System - MIL/Battery Lamp ON/DTC's P1A5A/P1A59|Page 4384 > < Hybrid System - MIL/Battery Lamp ON/DTC's P1A5A/P1A59|Page 4382
Page 11
background image

Remove the 36-volt positive battery cable retainer bolt (1).

Remove and discard the 36-volt positive battery cable lead nut (3).

Remove the 36-volt positive battery cable lead nut (1).

Remove the 36-volt positive battery cable leads (2).

Secure the cables out of the way ensuring that the cables CANNOT be re-installed without your knowledge.

Disconnect the body wiring harness electrical connector (1) from the generator battery disconnect control module pigtail.

Remove the generator battery carrier nuts (2).

With the aid of an assistant lift the generator battery carrier up off of the studs and rotate and position the carrier towards the rear of the vehicle.

With the aid of an assistant remove the generator battery carrier out though the truck opening. Place the carrier on a workbench.

Hybrid System - MIL/Battery Lamp ON/DTC's P1A5A/P1A59|Page 4384 > < Hybrid System - MIL/Battery Lamp ON/DTC's P1A5A/P1A59|Page 4382