VUE FWD L4-2.4L Hybrid (2007)
31.
Disconnect the generator battery temperature sensor wiring harness electrical connectors (2, 5) from the generator control module.
32.
Remove the generator battery temperature sensor wiring harness.
33.
Remove the remaining generator battery cable from the battery.
34.
Remove all the mounting bolts (1) from the 3 generator batteries.
Important:
Each hybrid battery must be placed in two (double) polyethylene 6 mil bags that were provided with the new batteries. If the bags were not
included with the batteries, contact your Saturn Parts Service Analysis (PSA) or the Saturn Saab Service Parts Assistance Centre (SPAC) for
Canadian retailers. This double bagging procedure must be performed as soon as the hybrid batteries are removed from the vehicle. After
bagging the individual battery cassettes, place the batteries in the original shipping container.
35.
Remove all 3 generator batteries.
36.
Remove the 3 temperature sensors from the batteries.
37.
Remove the four generator battery control module assembly bolts.
38.
Remove the generator battery control module assembly from the carrier.
39.
Remove the two remaining lower vent fan bolts and fan from the carrier.
