saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Generator Battery Control Module Cover Replacement|Page 4531 > < Generator Battery Control Module Cover Replacement|Page 4529
Page 8
background image

5. Install the generator control module ground strap to the stud and install the ground strap nut to the module.

Tighten the nut to 10 N.m (89 lb in).

6. Connect the engine wiring harness electrical connector (1) to the transaxle auxiliary pump.

Generator Battery Control Module Cover Replacement|Page 4531 > < Generator Battery Control Module Cover Replacement|Page 4529