saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Customer Interest for Hybrid Power Control Module: > < Drive Motor Fuse|Service and Repair
Page 1
background image

Hybrid Power Control Module: All Technical Service Bulletins
Hybrid Systems - Supersession of Battery Disconnect Unit

INFORMATION

Bulletin No.: 10-06-130-001

Date: January 27, 2010

Subject: Supersession of Battery Disconnect Unit (BDU) [Module Asm - Bat Engy Cont]

Models:

2007 Saturn VUE Green Line Hybrid

The original BDU assembly is being superseded to the same part numbers used in the 2007-2009 AURA vehicles. This replacement BDU has a shorter
wiring harness pig tail, a different fan wiring connector and different programming.

To install the replacement BDU, it will be necessary to add a "jumper" to account for the wiring length change, replace the cooling fan assembly with
one that has the new connector and program the BDU using SPS after installation into the vehicle. Refer to the Parts Information below for the
replacement BDU, harness assembly-drive motor battery disconnect module and cooling fan assembly.

Refer to Battery Energy Control Module Replacement in SI for installation procedures.

Important
The replacement BDU must be programmed with SPS after installation or DTC(s) will be set.

Refer to Battery Energy Control Module Replacement in SI for installation procedures.

Parts Information

Disclaimer

Customer Interest for Hybrid Power Control Module: > < Drive Motor Fuse|Service and Repair