VUE FWD L4-2.4L Hybrid (2007)
Door/Trunk Ajar Indicator/Lamp: Description and Operation
Door Ajar Indicator Description and Operation
Door Ajar Indicator System Components
The door ajar indicator system consists of the following components:
*
The body control module (BCM)
*
The instrument panel cluster (IPC)
*
The driver information center (DIC)
*
The driver door jamb switch
*
The passenger door jamb switch
*
The left rear door jamb switch
*
The right rear door jamb switch
*
The liftgate actuator/ajar switch
Driver and Passenger Door Ajar Operation
The body control module (BCM) receives a discrete input from the respective jamb switch to indicate the status of the door. The BCM then
communicates this status to the instrument panel cluster (IPC) via a class 2 message. The IPC, upon receipt of this class 2 message, will illuminate the
appropriate ajar message in the driver information center (DIC) and also send a class 2 message to the radio to activate the door ajar audible warning
when the following conditions are met:
*
The transmission is removed from PARK.
*
The vehicle speed is greater then 8.05 km/h (5 mph).
