VUE FWD L4-2.4L Hybrid (2007)
Drive Belt: Service and Repair
Drive Belt Replacement
Tools Required
EN-48079 Hydraulic Belt Tensioner Compressor
Removal Procedure
1. Remove the air cleaner assembly.
2. Install the EN-48079 (1) to the drive belt tensioner spring.
3. Compress the drive belt tensioner spring fully using the EN-48079 (1).
4. Install a box wrench to the drive belt tensioner (2) and rotate the tensioner counterclockwise in order to release the tension from the drive belt.
5. With the tensioner released, remove the drive belt from under the middle idler pulley.
6. Slowly rotate the tensioner clockwise in order to allow the tensioner to rest.
7. Remove the drive belt from the vehicle.
Installation Procedure
