VUE FWD L4-2.4L Hybrid (2007)
1. Install and position the drive belt around all of the pulleys except for the middle idler pulley.
2. Install a box wrench to the drive belt tensioner (2) and rotate the tensioner counterclockwise in order to release the tensioner.
3. Install the drive belt under the middle idler pulley.
4. Slowly rotate the tensioner clockwise in order to allow the tensioner to rest against the drive belt.
5. Loosen the forcing bolt on the EN-48079 (1) and remove from the drive belt tensioner spring.
6. Ensure that the drive belt tensioner idler is fully seated against the drive belt.
7. Install the air cleaner assembly.
