VUE FWD L4-2.4L Hybrid (2007)
5. Remove the EVAP canister purge valve bracket bolt.
6. Remove the EVAP canister purge valve with bracket.
7. Remove the EVAP canister purge valve from the bracket.
8. Inspect for carbon release in the EVAP canister purge valve ports. If there is any loose carbon, replace the EVAP canister and any components
necessary to remove the carbon particles.
Installation Procedure
1. Install the EVAP canister purge valve to the bracket.
2. Position the EVAP canister purge valve with bracket to the cylinder head.
Notice: Refer to Fastener Notice.
3. Install the EVAP canister purge valve bracket bolt.
Tighten the bolt to 25 N.m (18 lb ft).
