VUE FWD L4-2.4L Hybrid (2007)
Fuel Line Coupler: Service and Repair
Plastic Collar Quick Connect Fitting Service
Plastic Collar Quick Connect Fitting Service
Removal Procedure
Caution: Refer to Gasoline/Gasoline Vapors Caution.
Important: There are several types of plastic collar fuel and evaporative emission quick connect fittings that may be used on this vehicle.
*
Bartholomew (1)
*
Q release (2)
*
Squeeze to release (3)
*
Sliding retainer (4)
*
Push down TI (5)
The following instructions apply to all of these types of fittings except where indicated.
Relieve the fuel system pressure. Refer to Fuel Pressure Relief.
Caution: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
1. Using compressed air, blow any dirt out of the quick connect fitting.
2. This step applies to the Bartholomew style connectors ONLY. Squeeze the plastic quick connect fitting release tabs.
