VUE FWD L4-2.4L Hybrid (2007)
1. Install the transaxle oil cooler pipes to the vehicle.
2. Fasten the transaxle oil cooler pipe retaining clip to the radiator
Notice: Refer to Fastener Notice.
Important: The correct thread engagement is critical. Crossthreaded fittings can achieve proper tightness value and still leak.
3. Install the lower transaxle oil cooler pipe fitting to the radiator.
Tighten the fitting to 16 N.m (12 lb ft).
4. Install the transaxle oil cooler pipes to the transaxle.
5. Install the transaxle oil cooler pipe retaining nut.
Tighten the nut to 4 N.m (27 lb in).
6. Lower the vehicle.
7. Install the upper transaxle oil cooler pipe fitting to the radiator.
Tighten the fitting to 16 N.m (12 lb ft).
8. Install the battery box.
Notice: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the
transaxle.
9. Adjust the transmission fluid level.
10. Inspect for fluid leaks.
Oil Feed Pipes Replacement
Oil Feed Pipes Replacement
Removal Procedure
1. Remove the transmission oil filter assembly.
