VUE FWD L4-2.4L Hybrid (2007)
Shift Cable: Service and Repair
5AT - Automatic Transmission
Shift Select Cable Replacement
Tools Required
J 36346 Fascia Retainer Remover
Removal Procedure
Caution: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist,
provide additional support for the vehicle on the opposite end from which the components are being removed.
Important: All shiftier cable and park lock cable clips are one time usage only. Any service repair requiring cables to be disconnected
from the transaxle control cable bracket or shiftier assembly will require a cable clip replacement.
1. Move the control assembly into the N - Neutral position.
Important: Record all pre-set radio stations.
2. Remove the battery.
3. Remove the battery tray.
4. Remove the right and left console trim panels.
5. Using the J 36346 or equivalent, disconnect the control cable from the control assembly lever.
6. Depress the control cable retainer clip tabs and remove the cable from the control assembly. Discard the clip.