VUE FWD L4-2.4L Hybrid (2007)
Important: The secondary clip is not required for service. Make sure the shifter cable is fully engaged into the shiftier control.
7. Install the shifter cable onto the control assembly. Secure with a new shiftier cable retainer clip.
8. Connect the shifter cable onto the control assembly pin.
9. Install the right and left console trim panels.
10. Enable SIR system.
Transmission Control Bracket Replacement
Transmission Control Bracket Replacement
Removal Procedure
1. Remove the control assembly.
2. Remove the transaxle control bracket and bolts.
Installation Procedure