VUE FWD L4-2.4L Hybrid (2007)
Important: Do not disturb the sealer bead applied to the RDM sealing surface.
6. Install the clutch housing cover (1) to the RDM.
7. Hand install the clutch housing cover bolts (2).
Notice: Refer to Fastener Notice.
8. Install the housing cover mounting bolts (1).
Tighten the bolts to 26 N.m (19 lb ft).
Important: Strict adherence to the sealer cure time must be observed.
9. Allow the sealer to cure a minimum of 8 hours.
10. Using the J 44851 (1) install the input shaft seal (2) to the housing cover (3).
