VUE FWD L4-2.4L Hybrid (2007)
1. Position the flywheel to the crankshaft.
2. Install the NEW flywheel bolts until snug.
3. Have an assistant install the J 38122-A, and a breaker bar to the crankshaft balancer in order to prevent the flywheel from rotating when tightening
the flywheel bolts.
Notice: Refer to Fastener Notice.
4. Tighten the flywheel bolts.
Tighten the bolts to 53 N.m (39 lb ft) plus an additional 25 degrees using the J 45059.
5. Remove the J 38122-A and breaker bar.
6. Install the transaxle.
