VUE FWD V6-3.5L (2008)
Keyless Entry Module: Service and Repair
Remote Control Door Lock Receiver Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution (See: Starting and Charging/Battery/Service Precautions/Technician Safety Information/Battery
Disconnect Caution) .
1. Disconnect the negative battery cable.
2. Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement (See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair) .
3. Remove the remote control door lock receiver.
Notice: Perform the SPO reprogramming when RFA receiver replaced.
4. Disconnect the electrical connector.
Installation Procedure