VUE FWD V6-3.5L (2008)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve Bracket Replacement
Brake Pressure Modulator Valve Bracket Replacement
Removal Procedure
1. Place the ignition switch in the OFF position.
2. Remove the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement (See: Maintenance/Fuses and
Circuit Breakers/Fuse Block/Service and Repair/Underhood Electrical Center or Junction Block Replacement) .
3. Remove the brake pressure modulator valve (BPMV) bolt (1).
4. Without disconnecting the brake pipe fittings, carefully lift the BPMV assembly (1) upward to release the mounting pins from the BPMV bracket
insulators.
Do not pry on the accumulator caps on the underside of the BPMV.