VUE FWD V6-3.5L (2008)
7. Remove the brake caliper guide pin bolts (1).
Hold the brake caliper guide pins stationary when removing the guide pin bolts.
8. Remove the brake caliper.
Installation Procedure
Important:
*
DO NOT use any air tools to remove or install the guide pin bolts. Use hand tools ONLY.
*
Install an open end wrench to hold the caliper guide pin in line with the brake caliper while removing or installing the caliper guide
pin bolt. DO NOT allow the open end wrench to come in contact with the brake caliper. Allowing the open end wrench to come in
contact with the brake caliper will cause a pulsation when the brakes are applied.
1. Install the brake caliper.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
