VUE FWD V6-3.5L (2008)
3. Install the brake pad shims (1).
4. Install the outer brake pad (1).
5. Install the inner brake pad (2).
Note the location of the wear sensor for correct installation.
Important:
*
DO NOT use any air tools to remove or install the guide pin bolts. Use hand tools ONLY.
*
Install an open end wrench to hold the caliper guide pin in line with the brake caliper while removing or installing the caliper guide
pin bolt. DO NOT allow the open end wrench to come in contact with the brake caliper. Allowing the open end wrench to come in
contact with the brake caliper will cause a pulsation when the brakes are applied.