VUE FWD V6-3.5L (2008)
1. Install the oil filter bypass valve. Seat the valve fully below the bypass valve hole chamfer.
2. Position the oil filter adapter and gasket to the engine.
3. Apply threadlock to the bolt/stud threads, if required. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids,
Lubricants, and Sealers) .
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the oil filter adapter bolts and stud.
Tighten the bolts and stud to 25 N.m (18 lb ft).
