VUE FWD V6-3.5L (2008)
Installation Procedure
Important: All gasket mating surfaces need to be free of oil and foreign material. Use cleaner to clean the surfaces. Refer to Adhesives, Fluids,
Lubricants, and Sealers (See: Specifications/Adhesives, Fluids, Lubricants, and Sealers) .
Important: RTV sealer is NOT to be placed under the lower intake manifold gaskets.
1. Install the lower intake manifold gaskets and seals.
2. Coat the ends of the push rods using prelube. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids,
Lubricants, and Sealers) .
Important: The intake valve push rods measure 146.0 mm (5.75 in) and the exhaust valve push rods measure 152.5 mm (6.0 in).
3. Install the push rods in their original location.
