VUE FWD V6-3.5L (2008)
Low Pressure Sensor / Switch: Service and Repair
Air Conditioning (A/C) Refrigerant Low Temperature Sensor Replacement
Removal Procedure
1. Remove the driver knee bloster panel. Refer to Driver Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair) .
2. If equipped with OnStar(R), remove the communications interface module. Refer to Communication Interface Module Replacement (See:
Accessories and Optional Equipment/Cellular Phone/Communications Control Module/Service and Repair/Communication Interface Module
Replacement) .
3. Disconnect the temperature sensor connector from the temperature sensor.
4. Twist the temperature sensor one quarter turn to disengage from the evaporator case assembly.
5. Remove the temperature sensor from the evaporator case assembly.
Installation Procedure