VUE FWD V6-3.5L (2008)
14. Apply * Kent High Tech Seam Sealer Part # P10200 to the perimeter of the plastic plugs. Reinstall the plugs.
15. Seal the edges of the Beta patch with * Kent High Tech Seam Sealer Part # P10200 as shown.
16. Water test the vehicle. Refer to step # 7 for inspection procedure.
17. Inspect harness connector X 200 for moisture. Dry as required and apply Dielectric Lubricant GM Part # 12377900 (in Canada use 10653529).
18. Clear any codes.
19. Reinstall the air inlet grille. Refer to Air Inlet Grille Panel Replacement in SI.
20. Reinstall the foam hinge pillar insulator.
21. Reinstall the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement in SI.
22. Reinstall the front carpet retainer. Refer to Front Side Door Opening Floor Carpet Retainer Replacement in SI.
* We believe this source and their products to be reliable. There may be additional manufacturers of such products/materials. General Motors does not
endorse, indicate any preference for or assume any responsibility for the products or material from this firm or for any such items that may be available
from other sources.
Parts Information
Warranty Information
Disclaimer
