VUE FWD V6-3.5L (2008)
2. Connect the engine wiring harness electrical connector (5) to the knock sensor (2).
3. Install the engine wiring harness heat shield (2).
4. Install the engine wiring harness heat shield bolts (1 and 4).
Tighten the bolts to 10 N.m (89 lb in).
5. Install the engine wiring harness heat shield nut (3).
Tighten the nut to 10 N.m (89 lb in).
6. Install the right catalytic converter. Refer to Catalytic Converter Replacement - Right Side (LZ4-3.5L) (See: Emission Control Systems/Catalytic
Converter/Service and Repair/Catalytic Converter Replacement - Right Side).