VUE FWD V6-3.5L (2008)
Installation Procedure
1. Install the MAP sensor seal into the upper intake manifold.
2. Install the MAP sensor and bracket.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the upper intake manifold bolts.
Tighten the bolts to 25 N.m (18 lb ft).
4. Install the spark plug wire clip to the intake manifold bracket.
5. Connect the MAP sensor electrical connector (1).
6. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Fuel Delivery and Air Induction/Air Cleaner Housing/Air
Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement) .
