saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Ignition Coil > < Ignition Cable|Testing and Inspection|Page 9910
Page 3
background image

6. Install the spark plug wire assembly.
7. Install the left side spark plug wire clips at the intake manifold bracket and heater inlet and outlet pipe.
8. If only one plug wire was replaced, install the plug wire and close the retaining clips.
9. Connect the left side spark plug wires to the ignition coil.

10. Connect the left side spark plug wires to the spark plugs.
11. Install the air cleaner outlet duct, if required. Refer to Air Cleaner Outlet Duct Replacement  (See: Fuel Delivery and Air Induction/Air Cleaner

Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement) .

Ignition Coil > < Ignition Cable|Testing and Inspection|Page 9910