VUE FWD V6-3.5L (2008)
9. Inspect the J 38826 orSA9207Z-A and the appropriate pigtail adapter for damage. Replace as needed.
10. Short the 2 SIR deployment harness (1) leads together using one banana plug seated into the other.
11. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).
12. Extend the SIR deployment harness and adapter to full length from the deployment fixture.
13. Connect the pretensioner (1) to the adapter (2) on the deployment harness (3).
Important: The rapid gas expansion involved with deploying a pretensioner is very loud. Notify all the people in the immediate area that
you intend to deploy the seat belt pretensioner.
14. Clear the area of people.
CAUTION: When you are deploying a pretensioner for disposal, perform the deployment procedures in the order listed. Failure to follow the
procedures in the order listed may result in personal injury.
15. Separate the 2 banana plugs on the SIR deployment harness.
