VUE FWD V6-3.5L (2008)
Tighten the front mounting nuts to 122 N.m (90 lb ft).
Tighten
Tighten the rear differential bushing bolts to 188 N.m (139 lb ft).
Cause 2
This may be caused by a nick in the wiring insulation in the left or right rear wheel speed sensor wiring.
Correction 2
Inspect the left and right rear wheel speed sensor wiring for a nick in the insulation. If found, remove the damaged area and splice the wires
together using a duraseal splice sleeve. Refer to Splicing Copper Wire Using Splice Sleeve in SI if necessary.
Parts Information
Warranty Information
For vehicles repaired under warranty use, the table.
Disclaimer