VUE FWD V6-3.5L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
16. Securely stake the security plate (10) into the cylinder sleeve assembly (4). Assemble the cylinder sleeve assembly and security plate. When
loading cylinder sleeve assembly into the staking tool, ensure staking cup number 12 is positioned cup toward cylinder sleeve. Secure assembled
staking tool in a vise. Rotate the forcing screw (13) in order to uniformly stake the cylinder sleeve material over the security plate.
Tighten the forcing screw (13) to 23-28 N.m (17-21 lb ft). Once the security plate has been staked to the assembly, ensure the actuator
(11) can rotate freely inside the assembly by inserting a key and removing it.
17. Install and stake the cover (9) onto the head of the cylinder sleeve assembly (4) by crimping the cover material in 4 places into the pockets around
the head of the cylinder sleeve. Ensure the cover is securely held onto the cylinder sleeve and that the key can be inserted into the cylinder sleeve
assembly through the slot in the cover.
18. Install the sidebar (3) into the cylinder sleeve assembly (4).
19. Install the 2 sidebar springs (2) into the cylinder sleeve assembly (4).
20. Install the stake and the 2 sidebar spring retainers (1) onto the cylinder sleeve assembly (4) by crimping the material on the cylinder sleeve onto
the sidebar spring retainers. Ensure the sidebar spring retainers are securely attached to the cylinder sleeve.
21. Insert the matching key into the cylinder assembly and confirm the following:
