VUE FWD V6-3.5L (2008)
10. Remove the power steering gear inlet hose bracket bolt (1) if equipped with HPS.
Important: Do not reuse the old O-Ring seals.
11. Disconnect the power steering gear inlet hose (2) and the power steering cooler hose (1) from the steering gear if equipped with HPS.
12. Maneuver and remove the steering gear through the left wheelhouse opening.
Installation Procedure
1. Maneuver the steering gear into the vehicle through the left wheelhouse opening. Make sure that the steering gear bushings are centered in the
frame.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
Important: Hand start all steering gear bolts and nuts before finalizing any torques.
2. Install the steering gear bolts and nuts.
