VUE FWD V6-3.5L (2008)
2. Install the oil pan gasket. Use a new gasket if the sealing ribs are damaged.
3. Install the oil pan. Replace the bottom pan, if damaged.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the oil pan attaching bolts.
Tighten the bolts to 12 N.m (106 lb in).
5. Lower the vehicle.
6. Fill the transmission.
7. Inspect the transmission fluid level. Refer to Transmission Fluid Check (See: Testing and Inspection/Component Tests and General
Diagnostics/4T45-E - Automatic Transaxle/Transmission Fluid Check)
8. Inspect the oil pan gasket for leaks.
Notice: Transmission Auxiliary Pump Priming must be performed after any service procedure is performed on the transmission that involves the
draining of and refill of transmission fluid. Failure to perform the Transmission Auxiliary Pump Priming will result in damage to the auxiliary
pump and possible damage to the transmission.
9. Using a scan tool, prime the Transmission Auxiliary Pump, if equipped with 2.4L (LAT-2.4L).