VUE FWD V6-3.5L (2008)
6. Install the rear transmission mount thru bolt (1).
Tighten the bolt to 110 N.m (81 lb ft).
7. Install the front transmission mount thru bolt.
Tighten the bolt to 110 N.m (81 lb ft).
8. Lower the vehicle.
9. Remove the engine support fixture.
10. Install the range selector cable bracket. Refer to Range Selector Lever Cable Bracket Replacement (See: Shift Linkage/Shift Cable/Service and
Repair/6T70/6T75 - Automatic Transmission/Range Selector Lever Cable Bracket Replacement) .
11. Install the battery box. Refer to Battery Box Replacement (See: Starting and Charging/Battery/Battery Tray/Service and Repair) .
Transmission Front Mount Replacement