VUE FWD V6-3.5L (2008)
4. Install the TFP switch assembly (13) onto the control valve body assembly.
5. Install the eighteen control valve body assembly bolts.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
6. Hand start the bolts.
Tighten the bolts to 14 N.m (124 lb in).
7. Install the transmission side cover. Refer to Control Valve Body Cover Replacement (See: Control Valve Body Cover Replacement) .
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the engine control module (ECM),
powertrain control module (PCM), or transmission control module (TCM) will need to relearn TAP values. Transmission performance
may be affected as new TAP values are learned.
