VUE FWD V6-3.6L Hybrid (2009)
14. Position the BPMV module and bracket assembly to the vehicle frame.
15. Install the BPMV bracket bolts (1) and tighten to 10 Nm (89 lb in).
16. Connect the EBCM electrical connector.
17. Tighten the brake modulator manual pressure relief valve (1) to 40 Nm (30 lb ft).
18. If installing a new EBCM, the EBCM must be programmed. Refer to Control Module References (See: Testing and Inspection/Programming and
Relearning).
19. Perform the Antilock Brake System Automated Bleed Procedure (See: Brake Bleeding/Service and Repair).
Follow the procedure completely to ensure the sensor and boost valve calibration and EBCM learn processes have been completed.