VUE FWD V6-3.6L Hybrid (2009)
3. Remove the brake hose fitting bolt (1).
4. Remove the brake hose fitting (2) from the brake caliper.
Note: Do not reuse the brake hose fitting gaskets.
5. Remove and discard the brake hose fitting gaskets (3).
6. Cap the brake hose fitting to prevent brake fluid loss and contamination.
Note:
*
DO NOT use any air tools to remove or install the guide pin bolts. Use hand tools ONLY.
*
Install an open end wrench to hold the caliper guide pin in line with the brake caliper while removing or installing the caliper guide pin bolt.
DO NOT allow the open end wrench to come in contact with the brake caliper. Allowing the open end wrench to come in contact with the
brake caliper will cause a pulsation when the brakes are applied.
7. Remove the brake caliper guide pin bolts (1).
Hold the brake caliper guide pins stationary when removing the guide pin bolts.
8. Remove the brake caliper.
