VUE FWD V6-3.6L Hybrid (2009)
Remove the ignition key.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
3. Clean all dirt and debris from the brake pressure modulator valve (BPMV) assembly and the brake pipe fittings.
Note: To ensure brake modulator and HPA pressure relief has occurred, the manual pressure relief valve must be opened momentarily.
4. Loosen the brake modulator manual pressure relief valve (1) 1/4 turn counterclockwise.
5. Seat, but do not tighten, the manual pressure relief valve.
6. Remove the BPMV bracket bolts (1).
7. Carefully slide the electronic hydraulic control unit rearward.
8. Lower the assembly slightly and support with heavy mechanics wire or equivalent.
9. Disconnect the electronic brake control module (EBCM) electrical connector.
