VUE FWD V6-3.6L Hybrid (2009)
1. Inspect the CMP actuator solenoid valve seal for damage. Replace the seal if necessary.
2. Install the CMP actuator solenoid valve.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the CMP actuator solenoid valve bolt and tighten to 10 Nm (89 lb in).
4. Connect the engine wiring harness electrical connector (4) to the bank 2 exhaust CMP actuator solenoid valve (5).
5. Install the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (See: Drive Belts, Mounts, Brackets and
Accessories/Engine Mount/Service and Repair).