VUE FWD V6-3.6L Hybrid (2009)
36. Attach a lifting device (1 and 2) to the drive motor generator control module assembly at the 3 identified locations.
37. Lift the drive motor generator control module assembly from the vehicle while feeding the coolant hoses through the support opening.
38. To replace the drive motor generator power inverter module (PIM) assembly, refer to Drive Motor Generator Power Inverter Module Removal and
Installation (See: Drive Motor Generator Power Inverter Module Removal and Installation). To replace the accessory DC power control module
(APM), refer to Accessory DC Power Control Module Removal and Installation (See: Accessory DC Power Control Module Removal and
Installation).
Installation Procedure
1. Attach a lifting device (1-2) to the drive motor generator control module assembly at the three identified locations.
2. Lower the drive motor generator control module assembly into the vehicle while feeding the coolant hoses through the support opening.
