VUE FWD V6-3.6L Hybrid (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the control module assembly mounting retaining bolt (1) and assembly mounting nuts (2). Tighten the mounting bolt and nuts to 9 Nm (80
lb in).
6. Install the underhood fuse block support and fastener (1) onto the control module. Tighten the bolt to 5 Nm (44 lb in).
7. Install the engine coolant recovery reservoir support stud (3) through the support and into the control module. Tighten the stud to 9 Nm (80 lb in).
8. Install the engine coolant recovery reservoir support fastener (2) onto the control module stud. Tighten the fastener to 5 Nm (44 lb in).
