VUE FWD V6-3.6L Hybrid (2009)
master cylinder reservoir cap diaphragm.
*
Master Cylinder Replacement (Without RPO HP5) (See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service
and Repair/Removal and Replacement/Master Cylinder Replacement)Master Cylinder Replacement (With RPO HP5) (See: Brakes and
Traction Control/Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Master Cylinder Replacement)
*
Front Brake Hose Replacement (See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Front Brake
Hose Replacement)
*
Rear Brake Hose Replacement (See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Rear Brake
Hose Replacement)
*
Front Brake Caliper Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Front Brake
Caliper Replacement)
*
Rear Brake Caliper Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Rear Brake
Caliper Replacement)
*
Brake Pressure Modulator Valve Replacement (See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Hydraulic
Control Assembly - Antilock Brakes/Service and Repair/Brake Pressure Modulator Valve Replacement)
4. If the brake fluid was NOT contaminated with an oil-based or a silicone-based substance, but WAS contaminated with water or dirt, rust,
corrosion, and/or brake dust, replace the brake master cylinder reservoir cap diaphragm which may have allowed the moisture or particles to enter
the hydraulic system.
5. Pressure bleed the hydraulic brake system; begin the procedure with the pressure bleeder reservoir filled to the maximum-fill level with the correct
brake fluid as indicated. Refer to Hydraulic Brake System Bleeding (Manual) (See: )Hydraulic Brake System Bleeding (Pressure) (See: ).