VUE FWD V6-3.6L Hybrid (2009)
5. Use the J 38125-12A tool to release the terminals by inserting the tool into the left side of the terminal release cavity as shown in the graphic. Use
the tool to move the terminal release to the right with a gentle prying motion. See the release tool cross reference in the Reference Guide of the
J-38125 to ensure that the correct release tool is used.
6. While holding the removal tool in place, gently pull the wire out of the back of the connector. Always remember never use force when pulling a
terminal out of a connector.
Repair Procedure
Use the appropriate terminal and follow the instructions in the J-38125 .
Location of the terminal in the repair tray and the proper crimp tool can be found in the appropriate connector end view.
Kostal Connectors (Glow Plug Control Module)
Kostal Connectors (Glow Plug Control Module)
Special Tools
J-38125 Terminal Repair Kit
Removal Procedure
