VUE FWD V6-3.6L Hybrid (2009)
1. Position the APP sensor (2) against the brake pedal assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the APP sensor bolts (1).
Tighten the bolts to 10 Nm (89 lb in).
3. Connect the instrument panel wiring harness electrical connector (2) to the APP sensor (1).
4. Install the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement (See: Body and Frame/Interior Moulding
/ Trim/Dashboard / Instrument Panel/Service and Repair).
