VUE FWD V6-3.6L Hybrid (2009)
Fuel Injector: Service and Repair
Fuel Injector Replacement
Fuel Injector Replacement
Special Tools
*
EN-47909 Injector Bore and Sleeve Cleaning Kit
*
EN-48266 Injector Seal Installer and Sizer
*
J 2619-01 Slide Hammer
*
J-37281-A Injector Remover
*
J 39313 Spark Plug Port Adapter
Removal Procedure
1. Relieve the high side fuel system pressure. Refer to Fuel Pressure Relief (with CH 48027-100) (See: Fuel Filter/Fuel Pressure Release/Service
and Repair)Fuel Pressure Relief (w/o CH 48027-100) (See: Fuel Filter/Fuel Pressure Release/Service and Repair).
2. Remove the drive motor generator power inverter module. Refer to Drive Motor Generator Power Inverter Module Removal and Installation (
See: Hybrid Drive Systems/Power Control System/Drive Motor Control Module/Service and Repair/Drive Motor Generator Power Inverter
Module Removal and Installation)
Note: The fuel injectors have an alignment feature, note the position of the injectors alignment for installation.
3. Remove the fuel injection fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement - Bank 1 (See: Fuel Rail/Service and
Repair/Fuel Injection Fuel Rail Assembly Replacement - Bank 1) or Fuel Injection Fuel Rail Assembly Replacement - Bank 2 (See: Fuel
Rail/Service and Repair/Fuel Injection Fuel Rail Assembly Replacement - Bank 2).
4. Remove and discard the three fuel injector retaining rings (1).
