VUE FWD V6-3.6L Hybrid (2009)
Installation Procedure
1. Install the CMP sensor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the CMP sensor bolt and tighten to 10 Nm (89 lb in).
3. Connect the engine wiring harness electrical connector (2) to the bank 1 intake CMP sensor (4).
4. Install the engine control module. Refer to Engine Control Module Replacement (See: Computers and Control Systems/Engine Control
Module/Service and Repair).
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service
and Repair).
