VUE FWD V6-3.6L Hybrid (2009)
Accelerator Pedal Position Sensor: Service and Repair
Accelerator Pedal Position Sensor Replacement
Removal Procedure
1. Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair).
2. Disconnect the instrument panel wiring harness electrical connector (2) from the accelerator pedal position (APP) sensor (1).
3. Remove the APP sensor bolts (1).
4. Remove the APP sensor (2).
Installation Procedure
