VUE FWD V6-3.6L Hybrid (2009)
1. Install the CMP sensor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the CMP sensor bolt and tighten to 10 Nm (89 lb in).
3. Connect the engine wiring harness electrical connector (1) to the bank 2 intake CMP sensor (8).
4. Install the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (See: Engine, Cooling and Exhaust/Engine/Drive
Belts, Mounts, Brackets and Accessories/Engine Mount/Service and Repair).