VUE FWD V6-3.6L Hybrid (2009)
3. Connect the engine wiring harness electrical connector to the HO2S electrical connector (9).
4. Install the HO2S electrical connector retainer to the harness clip (7).
5. Install the CPA retainer.
6. Reposition and install the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement (HP7) (See:
Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair)Underhood Electrical Center or Junction Block Replacement (HP5) (
See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair)
7. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (LY7) (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement)Fuel Injector Sight Shield Replacement (LCS) (See:
Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement).