VUE FWD V6-3.6L Hybrid (2009)
15. Connect the current sensor harness connector (1).
16. Install the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement (LY7) (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement)Fuel Injector Sight Shield Replacement (LCS) (See:
Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement).
17. Install the drive motor generator power inverter module cover. Refer to Drive Motor Generator Power Inverter Module Cover Replacement (See:
Hybrid Drive Systems/Power Control System/Drive Motor Control Module/Service and Repair/Drive Motor Generator Power Inverter Module
Removal and Installation).
18. Install the center pillar lower garnish molding. Refer to Center Pillar Lower Garnish Molding Replacement (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair).
19. Install the quarter lower rear trim panel. Refer to Quarter Lower Rear Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair).
20. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (HP5) (See: Service and Repair).
