VUE FWD V6-3.6L Hybrid (2009)
Note: Use a 90 degree bend TORX(R) bit to hold the ball stud when tightening the nut.
3. Install the stabilizer link to stabilizer shaft nut and tighten to 50 Nm (37 lb ft).
4. Tighten the loose stabilizer shaft clamp bolts to 70 Nm (52 lb ft).
5. Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
6. Lower the vehicle.
