VUE FWD V6-3.6L Hybrid (2009)
5. If the leak requires the washer hose to be removed in the front of dash panel grommet complete the following:
*
Carefully slit the grommet next to the original washer hose.
*
Pass the new section of the washer hose through, next to the existing grommet tubing.
*
Repair the hose on either side of the grommet.
*
Use small tie straps to secure the hose onto the washer tubing.
*
Verify the repair by operating the washer system.
*
Seal any openings in the grommet, larger than the hose that was passed through.
