Wagon L4-1.9L DOHC VIN 7 (1994)
Fig. 24 Front Cover Tightening Sequence.
4. Install the front cover assembly fasteners. Front Cover (Perimeter and 1992 top center) Bolts: Torque: 30 Nm (22 ft-lbs). Front Cover Lower
Center: Torque: 10 Nm (89 in-lbs).
5. Install the four oil pan fasteners. Oil Pan Torque: 9 Nm (80 in-lbs).
NOTICE: After the front cover is installed, 6-12 squirts of oil can be pumped through the front oil seal drain back hole to make sure it is not
plugged.
6. Apply RTV across the cylinder head and front cover "T" joints. The cam cover gasket can be reused if not damaged. Install the cam cover
assembly and tighten the fasteners uniformly. Torque: 10 Nm (89 ft-lbs).
